You have been redirected to the Magyar version of the website based on your browser language preferences. If you prefer the English version, click here to go back.

« Vissza az útmutatók listájához

Wii Remote Plus (RVL-CNT-01-TR) Connection Guide

This guide is outdated!
Nowadays, Dolphin can directly pair and connect to RVL-CNT-01-TR remotes without the aid of 3rd party software/hardware in nearly all currently supported desktop OSes. Most content of this guide is only applicable to older OS versions that are not supported by Dolphin anymore (e.g. Windows 7/8/8.1), or relies on discontinued software, not available anymore (e.g. Toshiba Bluetooth Stack).


Released only a year after the Wii MotionPlus accessory, the Wii Remote Plus is a Wii Remote with the MotionPlus addon built into the Wii Remote. Unfortunately, shortly after the Wii Remote Pluses came out, a new Wii Remote Plus type appeared. Whereas the standard Wii Remotes and the very first Wii Remote Pluses register as RVL-CNT-01, the new Wii Remotes register as RVL-CNT-01-TR. What exactly changed is unknown, but all -TR Wii Remotes may need additional hardware/software to work with Dolphin. Since all Wii Remotes for sale in stores since 2011 are -TR Wii Remotes, this has become a growing problem. Fortunately, they can work with Dolphin -- with some special requirements. This guide tells you how to connect and use a RVL-CNT-01-TR Wii Remote Plus in Dolphin.

Note that the very first Wii Remote Pluses, such as those included in FlingSmash and The Legend of Zelda: Skyward Sword, are not RVL-CNT-01-TR Wii Remotes. For this reason, this guide will not use the blanket "Wii Remote Plus" term, but will use "-TR Wii Remote" to refer to the RVL-CNT-01-TR Wii Remotes specifically. While the addition of the sync button on the battery cover is the common way to tell non-TR Wii Remote Pluses from -TR Wii Remote Pluses, even that is not 100% reliable. The only way to know for sure to is connect it to a computer and see if it is registered as RVL-CNT-01-TR.

Bluetooth Passthrough Mode

In the Bluetooth Passthrough mode, -TR Wii Remotes are not an issue at all. Refer to Bluetooth Passthrough for details.


Linux

Linux (> 3.11) does not require any special treatment. Use the normal connecting methods shown in Configuring Controllers.

Since 5.0-876, the DolphinBar can also be used on Linux.


macOS

macOS does not require any special hardware or software. It only requires a device be paired beforehand.

  1. Open Bluetooth Settings and click the plus (+) sign to set up a new device.
  2. While it is scanning, press the red sync button on the back of the controller. All four lights on the front of the controller should be flashing.
  3. Back in the Bluetooth Settings, hit "Continue" and wait for it to fail.
  4. Select 'Passcode Options' and choose "Do not use a passcode with this device". Click "OK" and then click "Quit".
  5. Double check in the Bluetooth menu to be certain that the controller is registered.

Once the pairing process is completed, the controller will be usable on Dolphin, as further instruction is available in the Configuring Controllers guide. However the red Sync button must be pressed instead of 1 + 2 every time to connect.

El Capitan

Since the El Capitan update, Bluetooth pairing requires a passcode. To get the Bluetooth passcode you must find the Bluetooth address of the Wii remote.

  1. Open System Preferences --> Bluetooth.
  2. Press the red sync button on the back of the Wii remote.
  3. After pairing fails, right-click on the device and look for the field "address".
  4. Record the address backwards (e.g. 00-1B-7A-D9-72-0E would be "e0279da7b10").
  5. Use a Hexadecimal-to-ASCII table or convertor (such as this one) to get ASCII text.
  6. Go back to Bluetooth settings, find the Wii remote device and click on options.
  7. Under "Passcode" paste/write the ASCII text into the field (ignore non-character such as "NULL" or "STX").
  8. Press the red sync button on the back of the Wii remote and click pair.
  9. If pairing fail, restart the computer and try pairing again.
  10. If pairing continues to fail, see below.

If Pairing Fails

For some people, pairing using the method above does not work. If this is the case open Dolphin, click on "Controller", select "Real WiiMote" from the Wiimote settings, press the red sync button on the back of the Wii remote and hit "refresh" under "Real Wiimote".


Windows

Windows includes the MS Bluetooth Stack and most Bluetooth adapters use it by default. Starting with Dolphin 4.0-8325, if you're using Windows 8 or newer, all you need to do to connect -TR Wii Remotes is the typical Wii Remote connectivity as described in Configuring Controllers. If you're running Windows 7 or earlier you'll have a previous version of MS Bluetooth Stack that lacks some Bluetooth functions which the -TR Wii Remote uses. In that case you have two solutions for this problem, the DolphinBar or the Toshiba Bluetooth Stack. Both have superior Bluetooth functionality and not only allow -TR Wii Remotes to work, but also fix minor Wii Remote bugs that are present in the MS Bluetooth Stack used on Windows 7 and earlier.

DolphinBar

The Mayflash DolphinBar is a combination Bluetooth adapter and Sensor Bar. It doesn't reveal any of the Bluetooth information to the operating system, instead sending HID packets directly to Dolphin without a Bluetooth Stack, thus allowing -TR support, syncing of Wii Remotes, and other features superior to what the Toshiba Stack can offer. However, since it does this, it is only useful for supported Wii controllers, and cannot be used as a full Bluetooth adapter. Full details are available in the DolphinBar Hardware Review.

Toshiba Stack

The Toshiba Stack provides full Bluetooth on Windows 7, for everything, not just Wii Remotes, and it has full -TR support. However, it requires the additional step of connecting Wii Remotes through the Toshiba Stack instead of just through Dolphin.

The link provided below is the official download page for Toshiba Stack. Use the newest version; it has the highest known compatibility. If the newest version doesn't work feel free to try older ones. Please be aware that Toshiba Stack will start in trial mode when using on a unsupported dongle subjected with forced driver installation, and will eventually require a supported adapter to continue use of the software.

Download page

Toshiba Stack and the Bluetooth Adapter

The Toshiba Stack only supports a limited number of Bluetooth adapters. For absolute maximum compatibility, buy a Bluetooth adapter that is specifically designed to use the Toshiba Bluetooth Stack; look for "Toshiba Bluetooth Software" somewhere on the package or for "Toshiba" in the comments on the online store. There is a small possibility that the adapter not in the list can be used with Toshiba Stack, through the installation with an edited driver file, as instructed in the later section. But please acknowledge that it is preferably for experienced users only. The instruction will be divided at some point for the users and their specific adapters throughout this guide, starting from the first step in the next section below.

Installing the Toshiba Bluetooth Stack

  1. If the Bluetooth adapter is USB based, insert it before the installation.
  2. Run the extractor. Make note of where it extracts to (For future reference, %userprofile%\AppData\Local\Temp\tc00590500a.temp\). When the installer does not start, run Setup.exe from the temp folder to start the installer. There are no settings to worry about, so just click through.
    • If there is a message pop up that says "Please plug in the Bluetooth device and click OK button", make sure the Bluetooth adapter is properly inserted, and if it still happens, the Bluetooth adapter is not supported. In that case, click on the Cancel button and try to finish the Toshiba Stack setup, then continue to #Forcing the Toshiba Drivers Onto the Adapter.
    • Restart the computer when prompted.
  3. When the installer setup is completed, and for the interests of this guide, try to close any pop ups before continue.
  4. The Bluetooth Settings window can be accessed through the Start Menu or double clicking the Bluetooth icon in the notification tray. This is where the users will be interacting with the Toshiba Stack on a regular basis, and it is necessary for the next section.
    The Bluetooth Settings window

Connecting the Wii Remote Plus

  1. In the Bluetooth Settings window, press the "New Connection" button.
  2. In the "Add New Connection Wizard" window, select the "Express Mode", and hit "Next".
  3. A searching window will appear. Press the Sync button on the bottom of the -TR Wii Remote.
  4. Now click through the windows. The windows will go away and it will show the Bluetooth settings screen with "Nintendo RVL-CNT-01-TR". Note the green and yellow lines clasping each others: this means the Bluetooth is presently connected. The Wii Remote will continue to flash, it is normal.
    Clasped lines indicate a connected Wii Remote

The connection setup with the -TR Wii Remote is completed and will be usable with Dolphin, as further instruction is available in the Configuring Controllers guide.

  • For a quick note, because of the Toshiba Stack, it is recommended that Continuous Scanning is enabled. Dolphin will immediately detect the Wii Remote and it will be used upon starting a game.
  • Another thing to note, when turning the Wii Remote off, its device ID will remain in the Bluetooth settings window, but the yellow and green clasped lines will be gone. To reconnect the Wii Remote, just double click it. A window will pop up asking to prepare the Wii Remote once again. Click "OK" and then press the red Sync button on the bottom of the Wii Remote. It will be reconnected in a matter of seconds.


Forcing the Toshiba Drivers Onto the Adapter

If Toshiba Stack does not seem to detect the adapter and shows endless "Please plug in the Bluetooth device and click OK button" prompts, it is because the Toshiba Stack will only install its drivers onto the adapter with a matching USB\VID number from the list. Naturally, the adapters not in the list are not supported and will be skipped. It is possible to make a workaround by adding the excluded adapter's USB\VID into the list.

Identifying Bluetooth Adapter's Hardware ID

  1. Open the Device Manager (or simply run "devmgmt.msc") and find the Bluetooth adapter in the list. It will either show up as a Bluetooth radio or as an unknown device.
    • For convenience in finding it in the Device Manager, expand the categories the Bluetooth device might be in, then if the adapter is unplugged, it will disappear from the list. Plug it back in, and it will reappear into the list. In other words, the Device Manager updates live.
  2. Open its Properties (right-click → Properties), then select "Hardware Ids" in the dropdown menu from the "Details" tab. Note the second (shorter) value. This is the USB\VID of the Bluetooth adapter. Copy it into the Notepad.

Editing Driver File

  1. Go to %programfiles(x86)%\Toshiba\Bluetooth Toshiba Stack\Drivers\tosrfusb\
  2. If desired, make a copy of tosrfusb.inf, and consider it as a backup.
  3. Edit tosrfusb.inf with administrator privileges. Notice that there are three long lists. The first and second lists should look something like this: %TosrfUsb.DeviceDesc###%=TosrfUsb_Device.
  4. In the bottom of the first list, copy the very last entry and make a duplicate below it. Take the number of the entry (the number immediately after "DeviceDesc") and increase it by one. Then erase the USB\VID of this new entry and replace it with the one for the Bluetooth adapter that was collected from last subsection.
    An example of device file in its original unedited state
    New line is highlighted in blue

  5. Copy the newly created entry from the first list, and paste into the bottom of the second list.
  6. On the bottom of the third list, copy the last entry of the third list and make a duplicate below it. Just like before, there is a number following "DeviceDesc" and increase it by one. After this, there is a name in parentheses. Change it to the way you want to recognize it for yourself. Toshiba won't rely on it in any way.
  7. Save the file and close it.

Disable Driver Signature Enforcement

By default, 64-bit versions of Windows does not let the users install drivers which are not signed. So, after modifying tosrfusb.inf its signature won't be valid anymore and Windows will block the installation unless Driver Signature Enforcement is disabled. Follow these steps on Windows 7:

  1. During boot-up, continuously press F8 to get to "Advanced Boot Options".
  2. When the boot manager menu appears, use the arrow keys to select "Disable driver signature enforcement".
  3. Press "Enter" and the computer will restart Windows with the driver signature enforcement disabled.

Installing the Modified Driver Onto the Bluetooth Adapter

The first step may run into the possibility of BSOD (Blue Screen of Death). Save everything and be prepared beforehand.

  1. Type "Bluetooth Settings" in the Start Menu or Start Screen and hit Enter. A Windows Security window will pop up asking to confirm installation of the unsigned drivers. Install the driver. The process may take some time, and errors may appear during it. Ignore them.
  2. When the installer setup is completed, and for the interests of this guide, try to close any pop ups before continue.
  3. Double click the Bluetooth icon that appeared in the notification tray. Click the "New Connection" button.
    • If the wizard screen appears, then the Toshiba Stack has successfully installed the Toshiba drivers to the Bluetooth adapter. Continue to #Connecting the Wii Remote Plus.
    • If a prompt appears saying "Bluetooth is not ready" ...then it failed. Once that point is reached, there is no way known to deal with this.

Pretending to Be a Toshiba Bluetooth Adapter

While there is no option to buy the Toshiba Bluetooth Stack without the bundled hardware, there is a way to make the Bluetooth device recognized as one. Paste the following into Notepad and save it as a .reg file, then run it. 

Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Toshiba\BluetoothStack\V1.0\Mng]
"TestVersion"="0"
Retrieved from "https://wiki.dolphin-emu.org/index.php?title=Wii_Remote_Plus_(RVL-CNT-01-TR)_Connection_Guide&oldid=189515"